No one wants to deal with a plumbing issue, but it’s sometimes inevitable. While some problems are caused by normal wear and tear of plumbing fixtures, others may be caused by how you use and maintain your plumbing system. Regardless of the cause, a malfunctioning plumbing system can cause severe damage to property, which may be costly in terms of repairs and replacement. It’s therefore prudent as a homeowner in Coral Springs, FL, to be proactive and seek the services of a professional plumber, at least once a year, to inspect your plumbing system for any potential issues.
Our plumbers at MainLine Plumbing have seen and fixed all types of plumbing issues regardless of their size. Below are some of the most common plumbing problems that we handle and what usually causes them.
Common Plumbing Problems around Your Home
Here are the common plumbing problems every homeowner should be on the lookout for:
Slow or Clogged Drains:
Water starting to pool around your feet when you’re in the shower or taking a bath is an indication that your drains are either slow or clogged. Clogged drains are usually caused by a buildup of hair, soap scum, grease, and other debris. If not unclogged on time, these clogs will cause water to back up in your sink, bathtub, or toilet, leading to flooding. On the other hand, slow drains are usually caused by a buildup of sediment in your pipes. Plunging the drain might help if the clog is not too far down the drain, but if that doesn’t work, you should call our experienced and licensed plumbers to help clear the clog quickly and efficiently.
If you notice mysterious puddles of water in your home or if your water bill has suddenly gone up for no apparent reason, then the chances are that you have a leaking pipe somewhere in your plumbing system. Leaks can be caused by all sorts of problems, including:
- Worn out pipes
- Pipe corrosion
- Stubborn clogs
- Damage from tree roots
- Incorrect pipe laying
- Pipe joint damage
- Cracked seals or cracked pipes
- Excessive water pressure
No matter the cause of your leak, it’s essential to have it fixed by our knowledgeable plumbers as soon as possible to avoid further damage to both your plumbing system and to your home itself.
A dripping faucet may not seem like a big deal, but it can waste a lot of water and drive up your water bill. Studies reveal that a faucet that drips at a rate of one drop per second can waste more than 3,000 gallons of water per year! Often, a dripping faucet is caused by a worn-out washer, corrosion, or improper faucet installation. Replacing the washer or O-ring should take care of the problem. If it doesn’t, you may have to replace the entire faucet.
If your toilet keeps running even after flushing it, you may have a faulty flapper or lift chain. The flapper is the rubber seal at the bottom of the tank that opens to allow water to flow into the bowl when you flush and closes to stop the water flow when the tank is full. If the flapper is worn out or if the lift chain is broken, it will cause your toilet to keep running. Replacing the flapper or lift chain should fix the problem, but if you’re unsure how to do it, our expert plumbers are one phone call away to handle your needs.
Low Water Pressure:
Do you have to turn on your faucet all the way around to get a steady stream of water? If so, then you probably have low water pressure. Many things can cause low water pressure, including:
- Mineral deposits in your pipes
- Hidden water leaks in your home
- Pipe Corrosion
- Cracked or blocked sewer lines
While you may be able to fix the problem yourself by cleaning your faucet aerators or flushing your water heater, in some cases, you may need to call a plumber to get to the root of the problem.
No Hot Water:
If your home has no hot water, you probably have a problem with your water heater. The most common cause of no hot water is a faulty heating element. The heating element heats the water in the tank, and if it’s not working, the water will not get hot. Other causes of no hot water include:
- A broken thermostat
- A tripped circuit breaker
- A faulty gas valve
Our seasoned plumbers in Coral Springs, FL, will be able to diagnose and fix problems with your water heater and offer a lasting solution.
Sump Pump Failure:
A sump pump is a pump that is installed in the lowest part of your basement and is used to remove water that has accumulated in the sump pit. The pit is usually lined with gravel or rocks and has a pipe that drains water away from your home. Sump pumps are activated by a float switch and turn on automatically when the water level in the pit reaches a certain point. While sump pumps are built to last, they can sometimes fail, usually due to:
Power Outages–If there’s a power outage in your area, your sump pump will not run, meaning it will not be able to remove water from the pit.
Pipe Blockages— If the pipe that drains water away from your home becomes blocked, it will cause water to back up into the sump pit and eventually cause your sump pump to fail.
Float Switch Problems–The float switch is what turns the sump pump on and off. If the float switch is stuck in the “on” position, it will cause the pump to run continuously and eventually overheat and fail.
If your sump pump has failed, call our company right away to prevent water damage to your home.
MainLine Plumbing Has All of Your Plumbing Repair Needs to be Covered
MainLine Plumbing is your trusted plumbing company in Coral Springs, FL. We’ve been in business for over a decade and have seen it all when it comes to plumbing issues. Whether you have a clogged drain, a leaking pipe, or a dripping faucet, we can help. Our plumbers have the expertise and rely on state-of-the-art equipment to diagnose and repair any plumbing problem. Besides, we offer same-day and emergency services at no extra cost!
You don’t have to go through a rough time alone! Hire our professional plumbers today and say goodbye to your plumbing troubles. Call us at 954-751-5606 or MainLine Plumbing online to schedule plumbing repair service in South Florida and the surrounding areas.