Have you ever considered how often you use the plumbing in your home? If you have, you will see that it’s used all day long. A properly functioning plumbing system is essential for showering, flushing the toilet, cleaning, and cooking. In addition, your hot water-based appliances rely on the plumbing system to function correctly. If any part of the plumbing system fails to work correctly, life in your home can be challenging.
Plumbing issues should never be ignored because the longer you wait to address the problem, the further damage will occur, resulting in an expensive repair bill.
If your plumbing system experiences any of the following problems, it’s best to call a plumbing company in Pompano Beach, FL immediately.
#1 Clogged Toilet
A clogged toilet isn’t usually a significant cause for concern because plunging the toilet will often break up the clog so the toilet can be flushed without overflowing. The clog is likely too large, solid, or located too far down the drainpipe if the plunger isn’t effective, and you’ll need to call a plumbing company to resolve the problem. You can’t use the toilet until the issue is resolved, which can be inconvenient, especially if you have one bathroom.
The plumbing company will send a plumber to your house with the tools necessary to eliminate the clog, so you can flush without worrying about an overflow. If the clog is located too far down the drainpipe, the plumber can remove the toilet to reach and remove the clog so that you can use the toilet.
#2 Running Toilet
Your toilet should run every time it’s flushed to fill the tank, so it’s ready for the next flush. The toilet should stop running when the tank is full and if the toilet is functioning correctly. You have a problem if the toilet continues running when the tank is full, and it’s best to call a plumber immediately.
A running toilet can waste 30 gallons of water daily and up to 900 gallons per month, causing your water bills to increase if the problem isn’t addressed quickly.
A few problems cause a toilet to run constantly, including:
- Broken or cracked flapper
- Broken chain
- The float is too high or low
- The refill hose is too long
- The toilet has reached the end of its lifespan and must be replaced.
A plumbing company will send a tech to your house to diagnose and resolve the issue, so the toilet stops running when the tank is full, and you won’t waste water.
#3 Brown or Rust-Colored Water
Clean, clear water should come from the taps in your house, and if the water is brown or rust-colored, it indicates contamination, which is a serious and dangerous problem.
The issue is with the water heater if the hot water is discolored and the cold water is clear. Sediment from the tank can break down and contaminate the water. If the unit is over ten years old, the tank’s interior could be breaking down, causing minerals and tiny shards of metal to contaminate the water. It won’t be safe to use hot water until the problem is resolved, so it’s best to call a plumbing company immediately.
If the hot and cold water is discolored, there’s an issue with the plumbing system. Rust and corrosion in the pipes are the most common cause of contamination, and there could be a leaking pipe under the house. Dirt can enter the line through the break and contaminate the water, making it unsafe.
A plumbing company in Pompano Beach, FL will send a tech to determine why the water is contaminated and make the repair. It’s best to avoid using the water until the problem is resolved, but if you must, boil it first.
#4 Insufficient Water Pressure
Adequate water pressure is essential to perform daily household tasks. Nobody wants to shower with minimal water flow, and insufficient water pressure can take some jobs longer than necessary. In addition, your water-based appliances need sufficient pressure to function at peak performance. If the water pressure in your house has decreased significantly, it’s best to call a plumbing company.
Poor hot water pressure indicates a problem with the water heater. Sediment will build up in the tank if the unit isn’t flushed and maintained regularly, creating a clog in the waterline and will affect the water pressure. A plumber can try to flush the sediment from the tank, but the unit must be replaced if it’s impossible.
Insufficient hot and cold water pressure indicates a problem with the plumbing system, and several things can cause this problem.
- The main shutoff valve is malfunctioning.
- The water meter valve malfunctioned.
- The pressure regulator failed.
- Clogged or corroded pipes
- A significant plumbing leak
A plumbing company in Pompano Beach, FL will send a tech to diagnose and resolve the issue to improve the water pressure.
Call MainLine Plumbing Today
You want to work with the best plumbing company when a plumbing issue occurs, and MainLine Plumbing is the best in the area. We’re one of the leading plumbing contractors in South Florida and have been serving customers in the area for nearly a decade, and our plumbers have decades of combined experience. They are professionally trained, and highly skilled and have tackled many of the most challenging jobs in the plumbing industry. They have the knowledge, skill, and experience to diagnose and repair any plumbing problem.
We understand how upsetting plumbing problems can be, and you don’t have to worry if you have an issue that must be addressed immediately. We have plumbers available 24 hours a day, 365 days a year, and we will get someone to your house as quickly as possible to resolve the problem.
We understand the financial issues many families face today, so we do our best to keep our prices low. Our website also has money-saving coupons to make certain services more affordable. If you have a plumbing issue and the repair cost is more than you can afford, we offer monthly payment options for qualified customers.
To schedule an appointment for plumbing service, give us a call at MainLine Plumbing or book online.